4K 8MP Dual-Lens PoE PTZ Camera

At 3W, the camera draws a small share of what a standard PoE port supplies. The IEEE 802.3af standard delivers up to 15.4W per port, so any PoE switch, PoE injector or recorder with PoE ports will run it with margin to spare. A DC 12V input is fitted as well, for places where the cable comes from a plain switch.

What a PoE install needs:

• A power source on the network side. A PoE switch, an injector next to the router, or a recorder with built-in PoE ports.
• Outdoor-rated cable. Cat5e or Cat6, up to 100m (328ft) per run under the Ethernet standard.
• A sealed connector. The RJ45 joint at the camera should sit inside a waterproof cap or junction box.
• One hole in the wall. The cable is the only thing that passes through.

The payoff is stability. There is no pairing by QR code, no router band to argue with and no signal that fades at the fence line. If the network switch is on a backup power supply, the camera keeps recording through a short power cut as well.

For whole-property plans that mix PoE and Wi-Fi cameras, the outdoor camera guide sets out which power option suits which spot.

That tilt range is unusually wide. It lets the camera look along a wall, straight down at an entrance, or up a sloping drive, which suits corner mounts on garages and outbuildings.

Night performance is where this model stands out on paper:

• 0.001 lux sensitivity, a very low light rating for a pan-tilt camera at this size.
• 30–40m of infrared reach, enough for a long garden or a small car park.
• Colour night vision, with automatic switching between day and night modes through an IR-cut filter.

Human detection filters alerts down to people, and the alarm options go further than most Wi-Fi models. As well as the app push, it can email snapshots, upload photos to an FTP server and sound a local alarm. An FTP upload sends evidence off the property even if the camera itself is damaged.

There is no zoom on this model. The lenses are fixed at 3.6mm, so the head points where you need it but does not magnify. Put it within a reasonable distance of the entrance you care about, and let the second lens hold the wider scene.

Recordings go to a microSD card up to 128GB inside the camera, which keeps a local copy even when the recorder or the app is offline.

1. Run the cable from the camera to a PoE port, with that switch or injector linked to your router.
2. Wait a minute for it to start and take a network address.
3. Put your phone on the same home network.
4. In iCSee, add a device and choose the nearby or wired search, then pick the camera from the list.
5. Set a strong device password and name it.
6. Insert the microSD card if not already fitted, and format it in the app.

It also runs in XMEye, and the maker lists a Windows PC client. For viewing on a computer or pulling the stream into other software, the RTSP and PC viewing guide covers the usual addresses and ports.

Recorder compatibility is spelled out only for iCSee and XMEye. If you plan to record to an NVR from another brand, ask the maker to confirm ONVIF support before relying on it.

The four options on offer are named 1/1.8-inch, 1/2.5-inch, 2/3-inch and 1/4-inch, which read like sensor sizes. Yet all four carry the same published specification: 8MP from 4MP + 4MP, 3.6mm lenses, the same night figures. Nothing in the maker's sheet says what differs between them.

• Ask which sensor each option uses before choosing.
• A larger sensor format generally gathers more light, if the options really differ.
• Absent an answer, treat them as one camera.

Pick the PoE PTZ when one mounting point must watch two directions and follow people, and a cable run is possible. Pick a bullet when the view is a single fixed scene, such as a gate or a side passage, and ONVIF recording matters: the HIKJBSET states ONVIF support outright.

The GESKS dual-lens is the middle road. It runs on Wi-Fi but has an Ethernet port, so a cable can be added later if the signal proves weak.

A PoE pan-tilt also pairs well with bullets on the same switch. A common layout puts fixed bullets on the side passages and the back door, where the view never changes, and one turning dual-lens head at the corner that overlooks the drive and the front garden. Every camera then shares one cable type, one power source and one app, and nothing depends on the Wi-Fi.

Before ordering, check:

• a PoE switch, injector or PoE recorder port is free;
• the cable run is under 100m and can be sealed at the camera;
• the mounting surface can take a pan-tilt head without blocking its turn;
• you are content with iCSee or XMEye as the viewing apps.